"Мозги" Nohau

Отредактируйте страницу и нажмите «Сохранить». Прочтите справочную страницу для ознакомления с синтаксисом вики. Пожалуйста, редактируйте только в том случае, если планируете улучшить содержимое. Если вы просто хотите потестировать что-либо, воспользуйтесь специальной страницей: PlayGround.

====== Установка и настройка nginx + php5-fpm на Debian (Ubuntu) ======

Установка на свежий образ Debian 8 Jessie, только что созданный (выполнять из под root или с приставкой sudo каждую команду), если возникнут сложности пишите в комментариях внизу:

''# apt-get update''

Вывод:
<code>
Получено:1 http://ftp.de.debian.org jessie InRelease [134 kB]
Получено:2 http://security.debian.org jessie/updates InRelease [63,1 kB]                     
Получено:3 http://security.debian.org jessie/updates/main amd64 Packages [113 kB]            
Получено:4 http://ftp.de.debian.org jessie/main amd64 Packages [6 768 kB]  
Получено:5 http://security.debian.org jessie/updates/contrib amd64 Packages [2 488 B]             
Получено:6 http://security.debian.org jessie/updates/non-free amd64 Packages [14 B]               
Получено:7 http://security.debian.org jessie/updates/contrib Translation-en [1 098 B]
Получено:8 http://security.debian.org jessie/updates/main Translation-en [62,1 kB]
Получено:9 http://security.debian.org jessie/updates/non-free Translation-en [14 B]
Получено:10 http://ftp.de.debian.org jessie/contrib amd64 Packages [50,1 kB] 
Получено:11 http://ftp.de.debian.org jessie/non-free amd64 Packages [83,6 kB]
Получено:12 http://ftp.de.debian.org jessie/contrib Translation-en [38,4 kB]
Получено:13 http://ftp.de.debian.org jessie/main Translation-ru [438 kB]                      
Получено:14 http://ftp.de.debian.org jessie/main Translation-en [4 585 kB]
Получено:15 http://ftp.de.debian.org jessie/non-free Translation-en [72,2 kB]                 
Получено 12,4 MБ за 7с (1 665 kБ/c)                                                                                                           
Чтение списков пакетов… Готово
</code>

''# apt-get install nginx''

Вывод:
<code>
Чтение списков пакетов… Готово
Построение дерева зависимостей       
Чтение информации о состоянии… Готово
Будут установлены следующие дополнительные пакеты:
  fontconfig-config fonts-dejavu-core libfontconfig1 libfreetype6 libgd3 libjbig0 libjpeg62-turbo libpng12-0 libtiff5 libvpx1 libx11-6
  libx11-data libxau6 libxcb1 libxdmcp6 libxpm4 libxslt1.1 nginx-common nginx-full
Предлагаемые пакеты:
  libgd-tools fcgiwrap nginx-doc ssl-cert
НОВЫЕ пакеты, которые будут установлены:
  fontconfig-config fonts-dejavu-core libfontconfig1 libfreetype6 libgd3 libjbig0 libjpeg62-turbo libpng12-0 libtiff5 libvpx1 libx11-6
  libx11-data libxau6 libxcb1 libxdmcp6 libxpm4 libxslt1.1 nginx nginx-common nginx-full
обновлено 0, установлено 20 новых пакетов, для удаления отмечено 0 пакетов, и 14 пакетов не обновлено.
Необходимо скачать 5 209 kБ архивов.
После данной операции, объём занятого дискового пространства возрастёт на 14,1 MB.
Хотите продолжить? [Д/н] Д
</code>

''# apt-get install php5-fpm''

Вывод:
<code>
Чтение списков пакетов… Готово
Построение дерева зависимостей       
Чтение информации о состоянии… Готово
Будут установлены следующие дополнительные пакеты:
  libalgorithm-c3-perl libapparmor1 libarchive-extract-perl libcgi-fast-perl libcgi-pm-perl libclass-c3-perl libclass-c3-xs-perl
  libcpan-meta-perl libdata-optlist-perl libdata-section-perl libfcgi-perl liblog-message-perl liblog-message-simple-perl libmagic1
  libmodule-build-perl libmodule-pluggable-perl libmodule-signature-perl libmro-compat-perl libonig2 libpackage-constants-perl
  libparams-util-perl libperl4-corelibs-perl libpod-latex-perl libpod-readme-perl libqdbm14 libregexp-common-perl libsoftware-license-perl
  libsub-exporter-perl libsub-install-perl libterm-ui-perl libtext-soundex-perl libtext-template-perl lsof perl perl-modules php5-cli
  php5-common php5-json php5-readline rename ucf
Предлагаемые пакеты:
  file perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl make libb-lint-perl libcpanplus-dist-build-perl libcpanplus-perl
  libfile-checktree-perl libobject-accessor-perl php-pear php5-user-cache
Рекомендуемые пакеты:
  libarchive-tar-perl
НОВЫЕ пакеты, которые будут установлены:
  libalgorithm-c3-perl libapparmor1 libarchive-extract-perl libcgi-fast-perl libcgi-pm-perl libclass-c3-perl libclass-c3-xs-perl
  libcpan-meta-perl libdata-optlist-perl libdata-section-perl libfcgi-perl liblog-message-perl liblog-message-simple-perl libmagic1
  libmodule-build-perl libmodule-pluggable-perl libmodule-signature-perl libmro-compat-perl libonig2 libpackage-constants-perl
  libparams-util-perl libperl4-corelibs-perl libpod-latex-perl libpod-readme-perl libqdbm14 libregexp-common-perl libsoftware-license-perl
  libsub-exporter-perl libsub-install-perl libterm-ui-perl libtext-soundex-perl libtext-template-perl lsof perl perl-modules php5-cli
  php5-common php5-fpm php5-json php5-readline rename ucf
обновлено 0, установлено 42 новых пакетов, для удаления отмечено 0 пакетов, и 14 пакетов не обновлено.
Необходимо скачать 12,6 MБ архивов.
После данной операции, объём занятого дискового пространства возрастёт на 61,8 MB.
Хотите продолжить? [Д/н] 
</code>

''# nano /etc/nginx/sites-enabled/default''

Заменить содержимое на:
<code>
##
# You should look at the following URL's in order to grasp a solid understanding
# of Nginx configuration files in order to fully unleash the power of Nginx.
# http://wiki.nginx.org/Pitfalls
# http://wiki.nginx.org/QuickStart
# http://wiki.nginx.org/Configuration
#
# Generally, you will want to move this file somewhere, and start with a clean
# file but keep this around for reference. Or just disable in sites-enabled.
#
# Please see /usr/share/doc/nginx-doc/examples/ for more detailed examples.
##

# Default server configuration
#
server {
	listen 80 default_server;
	listen [::]:80 default_server;

# SSL configuration
	#
	# listen 443 ssl default_server;
	# listen [::]:443 ssl default_server;
	#
	# Self signed certs generated by the ssl-cert package
	# Don't use them in a production server!
	#
	# include snippets/snakeoil.conf;

root /var/www/html;

# Add index.php to the list if you are using PHP
	index index.html index.php index.htm index.nginx-debian.html;

server_name _;

location / {
		# First attempt to serve request as file, then
		# as directory, then fall back to displaying a 404.
		try_files $uri $uri/ =404;
	}

# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
	#
	#location ~ \.php$ {
	#	include snippets/fastcgi-php.conf;
	#
	#	# With php5-cgi alone:
	#	#fastcgi_pass 127.0.0.1:9000;
	#	# With php5-fpm:
	#	fastcgi_pass unix:/var/run/php5-fpm.sock;
	#}

# deny access to .htaccess files, if Apache's document root
	# concurs with nginx's one
	#
	#location ~ /\.ht {
	#	deny all;
	#}

location ~ \.php$ {
    try_files $uri =404;
    fastcgi_pass unix:/var/run/php5-fpm.sock;
    fastcgi_index index.php;
    fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;

include fastcgi_params;
}

location ~ ^/(fpmstat|ping)$ {
    access_log off;
    allow 127.0.0.1;
    allow 91.226.80.58; #your-ip
    deny all;
    include fastcgi_params;
    fastcgi_param SCRIPT_FILENAME /fpmstat;
    fastcgi_pass unix:/var/run/phpfpm-webpanels.sock;
}

location ~* ^.+.(html|jpg|jpeg|gif|css|png|js|ico|txt)$ {
    expires 60d;
}

}

# Virtual Host configuration for example.com
#
# You can move that to a different file under sites-available/ and symlink that
# to sites-enabled/ to enable it.
#
#server {
#	listen 80;
#	listen [::]:80;
#
#	server_name example.com;
#
#	root /var/www/example.com;
#	index index.html;
#
#	location / {
#		try_files $uri $uri/ =404;
#	}
#}
</code>

''# nano /etc/php5/fpm/php-fpm.conf''

Заменить содержимое на:
<code>
pid = /var/run/php5-fpm.pid
error_log = /var/log/php5-fpm.log
process.max = 64
process.priority = -5
rlimit_files = 1024
events.mechanism = epoll
include=/etc/php5/fpm/pool.d/*.conf
</code>

''# nano /etc/php5/fpm/pool.d/www.conf''

<code>
; Start a new pool named 'www'.
; the variable $pool can we used in any directive and will be replaced by the
; pool name ('www' here)
[www]

; Per pool prefix
; It only applies on the following directives:
; - 'access.log'
; - 'slowlog'
; - 'listen' (unixsocket)
; - 'chroot'
; - 'chdir'
; - 'php_values'
; - 'php_admin_values'
; When not set, the global prefix (or /usr) applies instead.
; Note: This directive can also be relative to the global prefix.
; Default Value: none
;prefix = /path/to/pools/$pool

; Unix user/group of processes
; Note: The user is mandatory. If the group is not set, the default user's group
;       will be used.
user = www-data
group = www-data

; The address on which to accept FastCGI requests.
; Valid syntaxes are:
;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
;                            a specific port;
;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
;                            a specific port;
;   'port'                 - to listen on a TCP socket to all IPv4 addresses on a
;                            specific port;
;   '[::]:port'            - to listen on a TCP socket to all addresses
;                            (IPv6 and IPv4-mapped) on a specific port;
;   '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
listen = /var/run/php5-fpm.sock

; Set listen(2) backlog.
; Default Value: 65535 (-1 on FreeBSD and OpenBSD)
;listen.backlog = 65535

; Set permissions for unix socket, if one is used. In Linux, read/write
; permissions must be set in order to allow connections from a web server. Many
; BSD-derived systems allow connections regardless of permissions. 
; Default Values: user and group are set as the running user
;                 mode is set to 0660
listen.owner = www-data
listen.group = www-data
listen.mode = 0660
; When POSIX Access Control Lists are supported you can set them using
; these options, value is a comma separated list of user/group names.
; When set, listen.owner and listen.group are ignored
;listen.acl_users =
;listen.acl_groups =
 
; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
; must be separated by a comma. If this value is left blank, connections will be
; accepted from any ip address.
; Default Value: any
;listen.allowed_clients = 127.0.0.1

; Specify the nice(2) priority to apply to the pool processes (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool processes will inherit the master process priority
;         unless it specified otherwise
; Default Value: no set
; process.priority = -19

; Choose how the process manager will control the number of child processes.
; Possible Values:
;   static  - a fixed number (pm.max_children) of child processes;
;   dynamic - the number of child processes are set dynamically based on the
;             following directives. With this process management, there will be
;             always at least 1 children.
;             pm.max_children      - the maximum number of children that can
;                                    be alive at the same time.
;             pm.start_servers     - the number of children created on startup.
;             pm.min_spare_servers - the minimum number of children in 'idle'
;                                    state (waiting to process). If the number
;                                    of 'idle' processes is less than this
;                                    number then some children will be created.
;             pm.max_spare_servers - the maximum number of children in 'idle'
;                                    state (waiting to process). If the number
;                                    of 'idle' processes is greater than this
;                                    number then some children will be killed.
;  ondemand - no children are created at startup. Children will be forked when
;             new requests will connect. The following parameter are used:
;             pm.max_children           - the maximum number of children that
;                                         can be alive at the same time.
;             pm.process_idle_timeout   - The number of seconds after which
;                                         an idle process will be killed.
; Note: This value is mandatory.
pm = dynamic

; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI. The below defaults are based on a server without much resources. Don't
; forget to tweak pm.* to fit your needs.
; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
; Note: This value is mandatory.
pm.max_children = 5

; The number of child processes created on startup.
; Note: Used only when pm is set to 'dynamic'
; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
pm.start_servers = 2

; The desired minimum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.min_spare_servers = 1

; The desired maximum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.max_spare_servers = 3

; The number of seconds after which an idle process will be killed.
; Note: Used only when pm is set to 'ondemand'
; Default Value: 10s
;pm.process_idle_timeout = 10s;
 
; The number of requests each child process should execute before respawning.
; This can be useful to work around memory leaks in 3rd party libraries. For
; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
; Default Value: 0
;pm.max_requests = 500

; The URI to view the FPM status page. If this value is not set, no URI will be
; recognized as a status page. It shows the following informations:
;   pool                 - the name of the pool;
;   process manager      - static, dynamic or ondemand;
;   start time           - the date and time FPM has started;
;   start since          - number of seconds since FPM has started;
;   accepted conn        - the number of request accepted by the pool;
;   listen queue         - the number of request in the queue of pending
;                          connections (see backlog in listen(2));
;   max listen queue     - the maximum number of requests in the queue
;                          of pending connections since FPM has started;
;   listen queue len     - the size of the socket queue of pending connections;
;   idle processes       - the number of idle processes;
;   active processes     - the number of active processes;
;   total processes      - the number of idle + active processes;
;   max active processes - the maximum number of active processes since FPM
;                          has started;
;   max children reached - number of times, the process limit has been reached,
;                          when pm tries to start more children (works only for
;                          pm 'dynamic' and 'ondemand');
; Value are updated in real time.
; Example output:
;   pool:                 www
;   process manager:      static
;   start time:           01/Jul/2011:17:53:49 +0200
;   start since:          62636
;   accepted conn:        190460
;   listen queue:         0
;   max listen queue:     1
;   listen queue len:     42
;   idle processes:       4
;   active processes:     11
;   total processes:      15
;   max active processes: 12
;   max children reached: 0
;
; By default the status page output is formatted as text/plain. Passing either
; 'html', 'xml' or 'json' in the query string will return the corresponding
; output syntax. Example:
;   http://www.foo.bar/status
;   http://www.foo.bar/status?json
;   http://www.foo.bar/status?html
;   http://www.foo.bar/status?xml
;
; By default the status page only outputs short status. Passing 'full' in the
; query string will also return status for each pool process.
; Example: 
;   http://www.foo.bar/status?full
;   http://www.foo.bar/status?json&full
;   http://www.foo.bar/status?html&full
;   http://www.foo.bar/status?xml&full
; The Full status returns for each process:
;   pid                  - the PID of the process;
;   state                - the state of the process (Idle, Running, ...);
;   start time           - the date and time the process has started;
;   start since          - the number of seconds since the process has started;
;   requests             - the number of requests the process has served;
;   request duration     - the duration in µs of the requests;
;   request method       - the request method (GET, POST, ...);
;   request URI          - the request URI with the query string;
;   content length       - the content length of the request (only with POST);
;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
;   script               - the main script called (or '-' if not set);
;   last request cpu     - the %cpu the last request consumed
;                          it's always 0 if the process is not in Idle state
;                          because CPU calculation is done when the request
;                          processing has terminated;
;   last request memory  - the max amount of memory the last request consumed
;                          it's always 0 if the process is not in Idle state
;                          because memory calculation is done when the request
;                          processing has terminated;
; If the process is in Idle state, then informations are related to the
; last request the process has served. Otherwise informations are related to
; the current request being served.
; Example output:
;   ************************
;   pid:                  31330
;   state:                Running
;   start time:           01/Jul/2011:17:53:49 +0200
;   start since:          63087
;   requests:             12808
;   request duration:     1250261
;   request method:       GET
;   request URI:          /test_mem.php?N=10000
;   content length:       0
;   user:                 -
;   script:               /home/fat/web/docs/php/test_mem.php
;   last request cpu:     0.00
;   last request memory:  0
;
; Note: There is a real-time FPM status monitoring sample web page available
;       It's available in: /usr/share/php5/fpm/status.html
;
; Note: The value must start with a leading slash (/). The value can be
;       anything, but it may not be a good idea to use the .php extension or it
;       may conflict with a real PHP file.
; Default Value: not set 
;pm.status_path = /status
 
; The ping URI to call the monitoring page of FPM. If this value is not set, no
; URI will be recognized as a ping page. This could be used to test from outside
; that FPM is alive and responding, or to
; - create a graph of FPM availability (rrd or such);
; - remove a server from a group if it is not responding (load balancing);
; - trigger alerts for the operating team (24/7).
; Note: The value must start with a leading slash (/). The value can be
;       anything, but it may not be a good idea to use the .php extension or it
;       may conflict with a real PHP file.
; Default Value: not set
;ping.path = /ping

; This directive may be used to customize the response of a ping request. The
; response is formatted as text/plain with a 200 response code.
; Default Value: pong
;ping.response = pong

; The access log file
; Default: not set
;access.log = log/$pool.access.log

; The access log format.
; The following syntax is allowed
;  %%: the '%' character
;  %C: %CPU used by the request
;      it can accept the following format:
;      - %{user}C for user CPU only
;      - %{system}C for system CPU only
;      - %{total}C  for user + system CPU (default)
;  %d: time taken to serve the request
;      it can accept the following format:
;      - %{seconds}d (default)
;      - %{miliseconds}d
;      - %{mili}d
;      - %{microseconds}d
;      - %{micro}d
;  %e: an environment variable (same as $_ENV or $_SERVER)
;      it must be associated with embraces to specify the name of the env
;      variable. Some exemples:
;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
;  %f: script filename
;  %l: content-length of the request (for POST request only)
;  %m: request method
;  %M: peak of memory allocated by PHP
;      it can accept the following format:
;      - %{bytes}M (default)
;      - %{kilobytes}M
;      - %{kilo}M
;      - %{megabytes}M
;      - %{mega}M
;  %n: pool name
;  %o: output header
;      it must be associated with embraces to specify the name of the header:
;      - %{Content-Type}o
;      - %{X-Powered-By}o
;      - %{Transfert-Encoding}o
;      - ....
;  %p: PID of the child that serviced the request
;  %P: PID of the parent of the child that serviced the request
;  %q: the query string 
;  %Q: the '?' character if query string exists
;  %r: the request URI (without the query string, see %q and %Q)
;  %R: remote IP address
;  %s: status (response code)
;  %t: server time the request was received
;      it can accept a strftime(3) format:
;      %d/%b/%Y:%H:%M:%S %z (default)
;  %T: time the log has been written (the request has finished)
;      it can accept a strftime(3) format:
;      %d/%b/%Y:%H:%M:%S %z (default)
;  %u: remote user
;
; Default: "%R - %u %t \"%m %r\" %s"
;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
 
; The log file for slow requests
; Default Value: not set
; Note: slowlog is mandatory if request_slowlog_timeout is set
;slowlog = log/$pool.log.slow
 
; The timeout for serving a single request after which a PHP backtrace will be
; dumped to the 'slowlog' file. A value of '0s' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_slowlog_timeout = 0
 
; The timeout for serving a single request after which the worker process will
; be killed. This option should be used when the 'max_execution_time' ini option
; does not stop script execution for some reason. A value of '0' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_terminate_timeout = 0
 
; Set open file descriptor rlimit.
; Default Value: system defined value
;rlimit_files = 1024
 
; Set max core size rlimit.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0
 
; Chroot to this directory at the start. This value must be defined as an
; absolute path. When this value is not set, chroot is not used.
; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
; of its subdirectories. If the pool prefix is not set, the global prefix
; will be used instead.
; Note: chrooting is a great security feature and should be used whenever 
;       possible. However, all PHP paths will be relative to the chroot
;       (error_log, sessions.save_path, ...).
; Default Value: not set
;chroot = 
 
; Chdir to this directory at the start.
; Note: relative path can be used.
; Default Value: current directory or / when chroot
chdir = /
 
; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Note: on highloaded environement, this can cause some delay in the page
; process time (several ms).
; Default Value: no
;catch_workers_output = yes

; Clear environment in FPM workers
; Prevents arbitrary environment variables from reaching FPM worker processes
; by clearing the environment in workers before env vars specified in this
; pool configuration are added.
; Setting to "no" will make all environment variables available to PHP code
; via getenv(), $_ENV and $_SERVER.
; Default Value: yes
;clear_env = no

; Limits the extensions of the main script FPM will allow to parse. This can
; prevent configuration mistakes on the web server side. You should only limit
; FPM to .php extensions to prevent malicious users to use other extensions to
; exectute php code.
; Note: set an empty value to allow all extensions.
; Default Value: .php
;security.limit_extensions = .php .php3 .php4 .php5
 
; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
; the current environment.
; Default Value: clean env
;env[HOSTNAME] = $HOSTNAME
;env[PATH] = /usr/local/bin:/usr/bin:/bin
;env[TMP] = /tmp
;env[TMPDIR] = /tmp
;env[TEMP] = /tmp

; Additional php.ini defines, specific to this pool of workers. These settings
; overwrite the values previously defined in the php.ini. The directives are the
; same as the PHP SAPI:
;   php_value/php_flag             - you can set classic ini defines which can
;                                    be overwritten from PHP call 'ini_set'. 
;   php_admin_value/php_admin_flag - these directives won't be overwritten by
;                                     PHP call 'ini_set'
; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.

; Defining 'extension' will load the corresponding shared extension from
; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
; overwrite previously defined php.ini values, but will append the new value
; instead.

; Note: path INI options can be relative and will be expanded with the prefix
; (pool, global or /usr)

; Default Value: nothing is defined by default except the values in php.ini and
;                specified at startup with the -d argument
;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
;php_flag[display_errors] = off
;php_admin_value[error_log] = /var/log/fpm-php.www.log
;php_admin_flag[log_errors] = on
;php_admin_value[memory_limit] = 32M
</code>

Перезапустим сервисы:

''# service php5-fpm restart''

''# service nginx restart''

Пожалуйста, введите код подтверждения, чтобы доказать, что вы не робот:

   ___   _____   __  ___ ______ __  __
  / _ \ / ___/  /  |/  //_  __/ \ \/ /
 / , _// (_ /  / /|_/ /  / /     \  / 
/_/|_| \___/  /_/  /_/  /_/      /_/

Пожалуйста, оставьте это поле пустым:

Сводка изменений

Примечание: редактируя эту страницу, вы соглашаетесь на использование своего вклада на условиях следующей лицензии: CC Attribution-Share Alike 4.0 International

"Мозги" Nohau

Инструменты пользователя

Инструменты сайта

Инструменты страницы